Sturtevant Richmont

The PTV is our oldest and most popular controller. The PTV
is capable of managing 4 parameter sets. Each parameter is
paired with a specific wrench. If the operator selects the wrong
wrench, communication is ignored until the correct wrench is
used.
This is the first, and principle hall mark of all SR tool controllers.
The right tool, at the right time ensures accuracy of the assembly
operation.
• Immediately informs operator via lights and a buzzer of proper
(“Accept”) or improper (“Reject”) wrench use
• Notifies operator and line when batch is complete
• Allows up to 255 fasteners per batch. Counts fasteners in
batch in either direction: up or down
• Cycle accept, cycle reject, batch complete, and reset relays
for use with line control system
• Simple and straightforward front panel programming with key
lock security control.
• Control tool use sequencing through the unit or via 24 VDC
control system
• Operates on either 110-120 VAC or 220-240 VAC power
• See page 15 for SLTC FM 2.4 GHz wrench capacities and
part numbers.