Distributor Portal

Sturtevant Richmont

Global 8

Torque Controller System

 

Literature

Global 8 process monitors work with up to eight PST 2000
ported torque sensing power tools, 1100-Series Exacta®
2 digital torque wrenches, 2.4 GHz preset torque wrenches— in any combination.
A large and readily visible display ensures the operator is aware of the status of each tightening, the progress through each batch of fastenings, the correct tool for the currently active fastener, and other information required to perform proper fastening.
The Global 8-Ethernet process monitors all have Ethernet ports, and one of the four available communication protocols pre-installed at the factory. Available protocols include: Open Protocol, Ethernet IP, PFCS, and ToolsNet. The lower display and keypad provide a Human-Machine Interface for programming elements of the communication.
Further, these units all have relays and a port for connection to your 24 VDC control system, and are capable of fixed or variable sequencing if desired.
When multiple tools of multiple types, or many tools of the same type must be used at a single cell or station, one of the Global 8-Ethernet family of process monitors is likely the optimum process monitor for that location.

System Capabilities:

• The Global 8 Controller works with up to 8 tools in any combination of SLTC FM 2.4 GHz preset click wrenches, 1100 Series Exacta 2 digital torque wrenches, or ported pneumatic tools equipped with the PST 2000.
• Integrates 1100-Series Exacta® 2 Digital Torque Wrenches
• Integrates PST 2000 Pressure Sensor/Transceiver for ported torque sensing power tools.
• Integrates 2.4 GHz Wireless Preset Torque Wrenches
• Manages and communicates variable torque data
• Manages and communicates attribute torque data
• Downloads specifications to tools
• Performs task sequencing
• Accepts task sequencing from external commands
• Display shows current tool and current tightening status
• LED’s for Cycle Accept, Cycle Reject, and Batch Accept
• 10-Pin I/O port for 24 VDC signals and relays
• Beeper augments visual communication
• Soft key programming on front panel or via free Tool Manager software.
• Global 8 models with Ethernet; Open Protocol, ToolsNet, and PFCS are equipped with two serial ports for use with barcode scanner and serial printer.